Mirage OM7 Technical Information download pdf (Page 26)

Assembly of Centerline

Collapsible Pilot Chute

Pass the large loop at the end of the bridle through the

canopy bridle attachment loop, then pass the entire

assembly, starting with the pilot chute handle through

the loop in the bridle. [Fig. 7]

Cinch tight [Fig. 8]

If these instructions are at all unclear or you have any

questions, CONSULT A RIGGER.

IMPORTANT: In order for the collapsing pilot

chute to work properly, it must be cocked before

every jump. Failure to cock the pilot chute may result in

a major malfunction. To cock the pilot chute, pull the

pilot chute handle while holding the bridle or stepping

on the packed main bag, in order to extract the collapse

line from the bridle. When it is safe to use, the bridle will

be colored in the window near the pin, not white. Check

that the collapse line shows color during a pin check

prior to every jump. If in doubt ASK A RIGGER.

Fig. 7

Fig. 8

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

No comments

Mirage OM7 Technical Information Page 26