Mirage OM7 Technical Information download pdf (Page 29)

Packing the Main Container

Lay the secondary riser covers over the risers.

Make sure that they are tucked into the riser channel.

[Fig. 5]

Helpful Hint: The secondary riser covers are made of a

material that will take a shape after use. Take a little

extra time on the first 10 pack jobs to insure proper

packing of these covers. This extra time will insure the

proper shaping of the secondary riser covers, which

should not be visible once the main riser covers are

packed.

Thread the pull-up cord. Use the short closing loop in

the #1 flap. [Fig. 6]

Fold back the main container flaps. Place the main bag

into the main pack tray.

IMPORTANT: Make sure the line stows go to the

bottom of the container.

[Fig. 7]

Helpful Hint: To get the best fit into the main container

insert the main bag with bridle grommet against the

reserve container first, then rotate the bag with the lines

towards the bottom of the container. Make sure the bag

fills the bottom corners. With the bulk evenly distributed

the main container will have a smooth appearance.

Fig. 5

Fig. 6

Fig. 7

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Mirage OM7 Technical Information Page 29