Mirage OM7 Technical Information download pdf (Page 30)

Packing the Main Container

Close flap #2, being sure the main bridle is routed out

from under the right side of the #2 flap. Mate the 1” vel-

cro on the bridle line to the 1” velcro on the main flap.

Lay excess bridle line to the right. [Fig. 8]

Close flap #3. [Fig. 9]

Helpful Hint: To help with main container symmetry,

keep the main deployment bag centered or a little to the

left inside the main pack tray. Pulling on the main flaps

while closing has a tendency to push the bag to one

side.

Close Flap #4, and insert closing pin into loop. Tuck and

route bridle under #4 flap. Run bridle under bridle

protection flap under bottom of container. Check center-

line collapsible bridle window to insure that the main

pilot chute is cocked. The centerline should show a col-

ored mark, not solid white. [Fig. 10] Stow the bridle

under the right main side (#4) flap from near the closing

pin down to bottom of the container.

Helpful Hint: No bridle or main pilot chute material

should be exposed. Exposed bridle may result in a

premature main container opening.

Fig. 8

Fig. 9

Fig. 10

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Mirage OM7 Technical Information Page 30