Mirage OM7 Technical Information download pdf (Page 24)

Assembly of Centerline

Collapsible Pilot Chute

Set out your main canopy, main bag and new pilot

chute. Find the bridle attachment point on your main

canopy [Fig. 1].

Remove the #4 Rapid link from the bridle. Be sure to

unscrew the barrel fully, that will help you to install it

later.

Feed the end of the bridle through the grommet in the

top of the main bag from the outside in. Fold the bridle if

necessary and push the two short loops of fabric (one

covered in yellow Kevlar tape) through the grommet as

well. About 1” (2.5 cm) should protrude through to the

inside of the main bag [Fig. 2]

Guide the open #4 Rapid link through the fabric loop

which is backed with yellow Kevlar tape [Fig. 3]

Fig. 1

Fig. 2

Fig. 3

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

No comments

Mirage OM7 Technical Information Page 24